Our Warehouse Team is off from December 24 to 27 and December 31 to January 1. Orders placed during this time will be fulfilled upon our return, in the order in which they are received.Customer support remains available throughout the holidays.

Our Warehouse Team is off from December 24 to 27 and December 31 to January 1. Orders placed during this time will be fulfilled upon our return, in the order in which they are received.Customer support remains available throughout the holidays.

Medium Strap Hanger

S-HWR-800X

Size: 10 Pack ($0.73 Each)

About the product

Medium strap picture hangers are professional grade strap hangers designed for various applications. A steel D ring held by a doubled-over steel strap, this narrow four-hole strap photo hanger comes with multiple holes to reduce the possibility of screws tearing out. 

  • Medium metal strap hanger for wood frames

  • Measures 3 1/8" long and 5/8" wide, strap measures 3/8" wide

  • Supports heavy frames and decor up to 20 lbs

  • Includes four (4) #6 x 1/2" screws

  • Can be used directly as an art hanger or together with picture hanging wire

Instructions

With picture wire:

  1. Place the frame face down on a blanket or soft surface.

  2. On the frame’s side rails, measure between one-quarter and one-third of the way down from the top of the frame. Mark this distance equally on both side rails.

  3. If the frame width allows it, position the hangers in alignment with the angle the picture wire will take when the frame is hung and the wire is under tension.

  4. Pre-drill all screw holes to avoid splitting the wood of the frame. Take care not to drill through to the front of the frame.

  5. Install the strap hangers on the frame using appropriate length screws.

  6. Attach heavy picture wire to the hangers. Leave enough slack in the picture wire so that when it is pulled taut from the back of the frame, the center point of the wire reaches about half the distance between the hanger and the top of the frame.

  7. Hang the picture on the wall.


Without picture wire:

  1. Place the frame face down on a blanket or soft surface.

  2. Align strap hangers vertically at the top corners of the frame. Measure their positions at an equal distance down from the frame's top edge, far enough to allow the frame to hide the picture hooks when the picture is hung on the wall. 

  3. Mark this distance on both corners.

  4. Pre-drill all screw holes to avoid splitting the wood of the frame. Take care not to drill through to the front of the frame.

  5. Install the strap hangers on the frame using appropriate length screws. 

  6. Ensure that the picture hooks on which the picture will be mounted are perfectly level on the wall and spaced apart at the same distance as the distance between the strap hangers on the frame.

  7. Hang the picture on the wall by placing the rings of the hangers directly onto the picture hooks.

Related Content

The Best Hangers for Lightweight Art

Everything You Need To Know About D-rings and Strap Hangers



Search