Super Steel 2-Hole Wire Hanger

About the product

Super steel frame hangers are multiple screw hangers ideal for securing frames that need additional screw holding power. Less bulky than D-rings and strap hangers, this heavy duty but very thin multiple screw frame hanger has two screw holes staggered to reduce the chance of wood splitting and offers support both above and below a frame’s picture wire.

• Best used on narrow and softwood frames 

• Measures 2" long and 1/2" wide

• Supports up to 50 lbs

• Includes #4 x ½” screws

• 10 pack: 10 hangers and 20 screws (good for 5 frames)

• 100 pack: 100 hangers and 200 screws (good for 50 frames)

• For use together with hanging wire

Instructions

1. Lay the picture frame face down on a blanket or soft surface.

2. Position one super steel hanger each on the left and right sides of the back of the frame. The arrows printed on the hangers should point inward, facing the center of the frame. Make sure the hangers are aligned with each other.

3. Mark the hangers’ places on the frame side rails with a pencil.

4. Attach the wire hangers onto the frame using a screwdriver with the screws provided.

5. Tie the picture wire into each hanger’s slot.TIP: Super steel frame hangers have an extruded O-shaped opening for wire that can bend up to receive it and re-flatten if needed.

6. Hang your picture on the wall.

Related Content

Everything You Need to Know About Wood Frame Hangers