S-HWR-2332-30X
Brass hooks are reliable picture hangers that provide additional holding power for pictures. They come with pointed brass nails to maximize wall support while leaving only a pin-sized hole on the wall to minimize wall damage. These professional picture frame hangers are used often in art galleries and museums.
Mark the position of the hanger on the wall using a pencil, then hold the picture hook in the marked position.
Hammer the nail gently into the nail socket until the hook is flush against the wall. The raised nail socket on the hook will guide the nails into the wall at the proper 45-degree angle. Avoid over hammering as it can compromise the hook’s holding power and damage your wall.
If using two hooks, space them apart evenly and repeat steps 1-2.TIP: When hanging hook & wire hung picture frames, pictures will hang straighter and be more secure over time with two hangers.
Hang the frame.
To remove a brass-plated hook, pull the nail back at a 45-degree angle with a slight twisting motion using fingers or soft-faced pliers. Prying hooks away from the wall with a screwdriver or a similar tool will often damage the wall surface.
To reuse a brass-plated hanger, ensure the hook and nail have not been bent or deformed.
